Select Page

China 315/355/400 Centre Distance Worm Series Double Enveloping Worm Gear Worm Gearbox worm gearbox exploded view

Solution Description

315/355/400 Centre Distance Worm Sequence Double Enveloping Worm Equipment Worm Gearbox

Solution Description

Sequence C  double enveloping worm equipment
Product: one hundred – 500
Ratio: ten -63
Output Torque : 683 – 51180 N.m
Score Energy : forty seven/25HP(1.41Kw) – 597HP(448Kw)

1, Large torque double enveloping worm equipment adjust toughest working condition .
two,Universal design double enveloping worm gearbox.
3, Sleek and noiseless procedure double worm gearbox.
four, Higher driving effectiveness than classic worm equipment.
five, Growing loading potential .
six, Rigorous top quality check before shipping and delivery
7, Customized design and style for numerous application
8, Lengthy lifestyle support time period
9,appropriate value with moderated
ten, reasonable cost & high good quality

In a Worm Gearbox, Worm Reduction Equipment Box, Worm Pace Reducer and Gear Motor Producer, three to eleven gear enamel are typically in contact with the worm, relying on the ratio. The improved variety of driven equipment enamel that are in make contact with with the worm substantially will increase torque capacity also raises shock load resistance. In addition to rising the number of pushed gear enamel in make contact with with the worm, Worm Gearbox, Worm Reduction Gear Box, Worm Pace Reducer and Gear Motor Manufacturer also will increase the speak to region on every equipment tooth. The genuine places of instantaneous get in touch with in between the worm threads and the pushed equipment tooth are strains. These lines of get in touch with transfer throughout the encounter of the equipment tooth as it progresses through its overall time of mesh with the worm. The lines of get in touch with in double-enveloping worm gearing are configured to increase the energy transmission functionality and minimize the tension on every equipment tooth.

 

 

Data sheet on CUW double enveloping worm gear reducer :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Electricity Ratio Permitted Torque Bodyweight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 forty eight 1.forty one~eleven.5 10 .twenty five~ 62 683-1094 42
one hundred twenty five 32 225 fifty five 2.42~19.7 10 .25 ~ 62 1170~2221 sixty five
a hundred and forty 38 255 65 3.94~twenty five.nine 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 four.39~35.7 10 .25 ~ 62 2143 ~4212 one hundred twenty
a hundred and eighty forty eight 320 80 5.83~forty seven.5 10 .25 ~ 62 2812 ~ 5387 a hundred and seventy
two hundred 55 350 ninety seven.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 sixty 390 one hundred 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 one hundred ten 12.9 ~a hundred and five 10 .twenty five~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 a hundred and forty 22.5 ~183 10 .25 ~ 62 11068~ 19450 seven-hundred
355 eighty 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 one hundred seventy 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 one hundred 740 one hundred ninety 42.6 ~347 10 .25 ~ 62 2571~39881 1980
five hundred 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700

 

Edge: 
The advantage of CZPT Substantial Effectiveness, Reduced Noice Cone Worm Sequence Worm Gearbox layout are extraordinary. First, the complete load is divided amid a lot more individual gear tooth, and the load is more divided in which enamel support 2 traces of make contact with. This exceptional load distribution tremendously will increase load carrying capability. 2nd, the improved torque throughput enables a smaller sized reducer to make the very same sum of torque, ensuing in measurement and fat personal savings.
Double-enveloping worm gearing can carry hundreds that would require significantly larger and heavier cylindrical worm gearing.

 

 Double-enveloping worm gearbox figure :

(Click on on photograph for much more details)

 

 

Our Providers

With all our routines DNV-ISO 9001, SGS -accredited, we stand for best-high quality service. Entrusting your gearboxes to the treatment of our Solutions.

Assist safeguard your gearbox from dress in and grinding, SGR gearbox converts torque reliably and effi­ciently.
We customize our CZPT planetary gear units, double enveloping worm gearbox, helical gear motor, modular layout helical gear unit, worm gearbox, cycloidal gearbox etc to match your software and fulfill your requirements. 

These attributes permit a trustworthy and risk-free services daily life of above two hundred 000 operational hrs. 

Our consumers have been inserting their have faith in in CZPT gear models since 1997. A lot more than 500 000 equipment units of our gearbox are in use reliably all around the planet, in several situations under quite severe situations.

 

 

US $1,000-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700
US $1,000-2,000
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China 315/355/400 Centre Distance Worm Series Double Enveloping Worm Gear Worm Gearbox     worm gearbox exploded viewChina 315/355/400 Centre Distance Worm Series Double Enveloping Worm Gear Worm Gearbox     worm gearbox exploded view
editor by czh 2022-11-30

Recent Posts

Gear-box-worm

As one of leading worm gearboxes manufacturers, suppliers and exporters of mechanical products, We offer worm gearboxes and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm gearboxes.